Skip to content
Anonymous preview

The phase angle is between current and resistance, not voltage and current

A five-minute sample lesson for the 6 students who hold this belief.

Copy or download this sample lesson and its affected-student roster.

Micro-lesson: The belief, said plainly

Start with the objective, then use the explanation and worked example.

~5 min

Objective

Recognise and correct the misconception before answering the diagnostic.

01Explanation

Your arithmetic was right — 46.3° is the correct number. But you described it as the angle between the current and the resistance. It is the angle between the supply voltage and the current.

02Why it is a reasonable thing to believe

The formula is arctan(X_L / R). R is sitting right there in it, so the angle looks like it belongs to R. And the impedance triangle you drew has R along the bottom, which makes it look exactly like a phasor diagram with R as the reference.

03Worked example

The two diagrams have different axes. The impedance triangle plots ohms against ohms — R, X_L, Z. The phasor diagram plots voltages and currents against time. They happen to be similar triangles, which is why the same arctan works for both, and that coincidence is what makes this so easy to confuse.

A phase angle is only ever between two things that vary with time. Resistance does not vary with time, so nothing can have a phase angle with respect to it.

04The test

Before naming any phase angle, ask: are both of these quantities waveforms? If one of them is a component value, you have named the wrong pair.

Two-question diagnostic

A student holding this belief fails these. A student who has corrected it passes.

  1. In a purely resistive AC circuit, what is the phase angle between voltage and current, and what is the angle 'between the current and the resistance'?

    Reveal diagnostic responses
    Still holds the belief

    Attempts a number for the second part, treating resistance as something an angle can be measured against.

    Has corrected it

    0° for the first; the second question is not meaningful, because resistance is not a time-varying quantity.

  2. Sketch the phasor diagram for this circuit and label which quantity is taken as the reference and why.

    Reveal diagnostic responses
    Still holds the belief

    Labels R as the reference phasor, importing the impedance triangle wholesale.

    Has corrected it

    Takes the current as the reference (common to both elements in series) and shows V lagging by 46.3°.

Roster attached — the finding converts straight into an action.

Back to the evidence